Know:
- Theoretical bases of technology of production of chemicals on the theme of work;
- modern technologies of chemical production;
- designs and principles of modern equipment and equipment of chemical production;
- typical methods of chemical and technological calculations.
Be able:
- summarize the data obtained from laboratory studies and measurements, from the point of view of their significance, and correlate them with the corresponding theory;
- to select the appropriate technological equipment and graphically depict the technological process;
- to carry out calculations of technological processes.

_

Master's qualification work includes such main divisions: 1. A review of the scientific and scientific-technical literature on the topic of work. 2. Description of experiments: the scheme of the plant, methods of syntheses and researches, reagents and materials. 3. Results and discussion. 4. Conclusions. 5. List of references.

_

The examination commission evaluates the defense of master's qualification work on the following criteria:
- reviewer review;
- the response of the head of the work;
- the level of presentation.

Knowledge and understanding:
• theoretical basis of the manufacturing process of chemical substances and materials, and products based on them;
• methods of chemical and physical-chemical raw materials analysis, materials, chemical products and wares based on them;
• advanced technologies for chemical manufacturing;
• theoretical basis of technological processing and main technology of products of organic synthesis, sources of raw materials and their preparation, synthesis conditions, ways and methods of separation of intermediate products and selection of purpose-oriented products;
• improvement methods of available organic synthesis technology;
• comparative characteristics and economic evaluation of a variety of the methods of organic compounds production;
• modern advances in the innovation technologies of the field.
Applying knowledge and understanding:
• evaluate the influence of technological factors on final product composition;
• assess the risk of chemicals and laboratory studies, and quality control of initial materials and final products of chemical technology;
• carry out a feasibility study of chemical manufacturing, have a command of technological process improvement methods, understand the theoretical and practical approaches to the creation and production management;
• select equipment for technological processes, use automated designing systems for the development of technological and hardware configuration of chemical and technological production;
• productive tasks solving, productive power effective application, appropriate consumption of materials and raw materials, producing of quality products in accordance with established technical conditions and standards;
• to summarize the obtained data from laboratory studies and measurements, to evaluate them from the point of view of their significance and to correlate them with the corresponding theory;
• to use modern information and communication technologies for searching, analysis, calculations and creation of the graphic and text documents, as well as for mathematical analysis and static processing in the research and design;
• to present the results of various types of work (research, search, design etc.) in Ukrainian and foreign languages.
Making judgments:
• ability to solve complex specialized issues and practical problems related to chemical technology and engineering during professional activity or study process: these are characterized by complexity and uncertainty of the conditions that involves the application of certain theories and methods of chemistry, chemical technology and engineering;
• ability to apply the knowledge and practical skills to optimize means of chemical production;
• ability to apply a systematic approach for developing of chemical technology.

Master's Thesis Internship
Master's Thesis Preparation

Master's Thesis includes the following sections: Introduction. 1. Theoretical basis. 2. Experimental part. 3. Results of experiments and their discussion. 4. Application of research results in technology 5. Economics. Conclusions. References. Annotation (in Ukrainian and foreign languages). Attachments

• Піх З. Г. Теорія хімічних процесів органічного синтезу: Підручник. – Вид-во Нац. ун-ту "Львівська політехніка". – 2002.
• Лебедев, Н. Н. Теория химических процессов основного органического и нефтехимического синтеза [Текст] / Н. Н. Лебедев, М. Н. Манаков, В. Ф. Швец. – М.: Химия, 1984. – 375 с.
• Шмидт Р., Сапунов В. Н. Неформальная кинетика. Пер. с англ./Под ред. И. П. Белецкой. – М.: Мир,1985. – 264с.
• Одабашян Г.В. Лабораторный практикум по химии и технологии основного органического и нефтехимического синтеза Учебное пособие для вузов / Под ред. Н.Н. Лебедева – М.: Химия, 1982. – 240 с.
• Literature on the subject of master's qualification work

The State Examination Commission evaluates the defense of master's qualification work on the following criteria:
- reviewer review;
- the response of the head of the work;
- the level of presentation.
Final control (oral form 100%)

_

_

_

_

_

know modern technology of silicate materials effective methods of determining their properties and applications;
be able to critically evaluate the results and compare them with world analogues;
to understand the economic efficiency of modern technology of production of silicate materials and proposed decisions

Chemical Technology of Fine, Technical Ceramics and Refractories;
Technology of Glass Products;
Chemical technology of air, autoclavable and hydraulic binders

Analysis of scientific and technical issues related to the theme of master's work. Conducting theoretical and experimental research. Implementation of mathematical modeling. Conducting feasibility calculations proving the competitiveness of the solutions proposed choice of equipment and processes.

1. Hоrshkov V. S. Fizicheskaia khimiia silikatov i druhikh tuhoplavkikh sоеdinenii / V. S. Hоrshkov, V. H. Саvеlev, N. F. Fеdоrоv. – М. : Vysshaia shkola, 1988. – 400 s. (in Russian)
2. Fizicheskaia khimiia silikatov : Ucheb. dlia studentov vuzov / [А. А. Pashchenkо, А. А. Miasnikov, Е. А. Miasnikova i dr.]; pod red. А. А. Pashchenkо. – М. : Vysshaia shkola, 1986. – 368 s. (in Russian)
3. Fіzychna khimii kremnezemu і nanodyspersnykh silikativ : navch. posib. / B. Yu. Kornilovych, О. Р. Andrievska, М. М. Plemiannikov, L.М. Spasonova; za red. B. Yu. Kornilovycha. – К. : «Osvita Ukrainy», 2013. – 178 s. (in Ukrainian)
4. Khimichna tekhnolohiia tuhoplavkykh nemetalevykh i sylikatnykh materialiv u prykladakh і zadacakh : u 2 cast. – Ch. 2 : Fizuko-himichni systemy, fazovi rivnovahu, termodynamika, resurso- tа enerhozberezhennia v tekhnolohii ТNSМ : navch. posib. / [О. Yu. Fedorenkо, Ya. М. Pіtаk, М. І. Ryshchenko tа in.]; zа rеd. М. І. Ryshchenka. – Kharkiv : NTU «KhPI», 2013. – 326 s. (in Ukrainian)

final control (100%, attestation)

Know:
- Theoretical bases of technology of oil and gas refinery;
- modern technologies of oil and gas refinery;
- designs and principles of modern equipment and equipment of chemical production;
- typical methods of chemical and technological calculations.
Be able:
- summarize the data obtained from laboratory studies and measurements, from the point of view of their significance, and correlate them with the corresponding theory;
- to select the appropriate technological equipment and graphically depict the technological process;
- to carry out calculations of technological processes.

_

Master's qualification work includes such main divisions: 1. A review of the scientific and scientific-technical literature on the topic of work. 2. Description of experiments: the scheme of the plant, methods of syntheses and researches, reagents and materials. 3. Results and discussion. 4. Conclusions. 5. List of references.

_

The examination commission evaluates the defense of master's qualification work on the following criteria:
- reviewer review;
- the response of the head of the work;
- the level of presentation.

- the development of skills of independent research students;
- systematization, the consolidation and expansion of theoretical and practical knowledge in the specialty;
- identify the level of independence of students in solving problems;
- justify the relevance and significance of the chosen topic in theory and on the terms of the research object.

Polymeric Materials;
Physico-chemistry of polymers;
Theoretical fundamentals of polymer processing;
Special research methods of structure and properties of macromolecular compounds;
Modern processes and processing of polymer composites.

Defining goals, specific tasks of research, object and subject of research. Assembling the extended plan for the master's work. Working with special scientific, methodical literature, regulation of the chosen theme. Implementation review of published studies on the topic of literature. Formulation characteristics of the original product. The choice of methods (procedures) implementation research. Research on the topic of master's work.

1. Торопцева А. М., Белогородская К. В., Бондаренко В. М. Лабораторный практикум по химии и технологии высокомолекулярных соединений. - Л: Химия, 1972. - 416с.
2. Ахназарова С.Л., Кафаров В.В. Оптимизация эксперимента в химии и химической технологии. - М.: Высш. шк. - 1978. – 319 с.
3. Білуха М.Т. Основи наукових досліджень: підруч. для вузів. – К.: Вища шк., 1997. – 271с.
4. Шейко В.М., Кушнаренко Н.М. Організація та методика науково-дослідницької діяльності: підручник. – К.: Знання, 2004. – 307 с.
6. Прокопов Н.И. и др. Практикум по методам исследования полимеров. – М.: МИТХТ имени М.В. Ломоносова, 2013. – 150с.
7. Рабек Я. Экспериментальные методы в химии полимеров. – М.: МИР, 1983. – 480с.

Protection work at the State Examination Commission (100%)

• know the methods and tools of theoretical and experimental research in the field of fusion technology Macromolecular, creation of plastics, elastomers and polymer composites based on high-molecular compounds and oligomers;
• know the methods and tools of theoretical and experimental research in the synthesis of macromolecular compounds forming plastic products, elastomers and polymer composites based on high-molecular compounds and oligomers;
• to be able to explore the physical, chemical and technological properties of polymeric materials and their components using modern methods of planning and execution of the experiment;
• to understand the development of plans, programs and procedures for research in the field of macromolecular compounds, polymer materials and products.

• Basics of polymer chemistry
• Theoretical basis of polymer synthesis technologies
• Special processes of synthesis and modification of polymers
• Chemical Technology of Macromolecular Synthesis,
• The use of computer technology in the production and processing of polymers.

Opratsovuvannya and analysis of specialized publications and journals, databases, patent search on the topic of research. Getting to know the job. Safety training. Introduction of hazardous and harmful substances and factors during the research work, methods of protection against them. Working goals and objectives of research. The development work plan. The study method raising experiment. Introduction to objects and methods of research. Implementation of experimental work. Learning the principles of development of regulatory documents on research products. Analysis of the results of the experiments, statistical analysis of the results and their publication.

1. Програма практики: Методичні вказівки для студентів спеціальності 05130198 “Хімічна технологія високомолекулярних сполук” / Укл.: В.С. Моравський, В.Є. Левицький, В.Й. Скорохода, М.М. Братичак, М.Л. Шекета. – Львів: Національний університет “Львівська поліехніка”, 2011. – 36 с.
2. Ровкина Н.М., Ляпков А.А. Лабораторный практикум по химии и технологии полимеров. Ч.I. Основные методы получения полимеров. Томск: Изд-во Томского политехнического университета, 2007. — 132 с.
3. Лабораторный практикум по химии и технологии высокомолекулярных соединений : учеб. пособие для студ. хим.-технол. спец. вузов / А.М. Торопцева, К.В. Белогородская, В.М. Бондаренко ; под ред. А.Ф. Николаева. Л. : Химия, 1972. 416 с.
4. Коршак В.В. Технология пластических масс. 3-е изд., перераб. и доп. - М.: Химия, 1985. - 560 с.

Protection for the State Examination Commission (100%)

Know:
- theoretical bases of synthesis and technology of food additives production on the theme of work;
- modern technologies of chemical production;
- designs and principles of modern equipment in chemical production;
- typical methods of chemical and technological calculations.
Be able:
- to carry out experimental researches in a chemical laboratory using modern methods of synthesis and investigationt of the structure of organic substances;
- to summarize the results of laboratory tests and interpret them from a theoretical point of view;
- to carry out calculations of technological processes;
- to select the appropriate technological equipment for the industrial realization of chemical and technological processes.

"Scientific research on the topics of chemical technologies of organic substances", "Special course on scientific research of specialty", "Technologies of food additives", "Toxicology of food and cosmetics", "The theory of chemical reactions and reactors", "Examination and quality control of food products and cosmetics","Research practice ","Practice on the theme of master's qualification work".

Master's qualification work includes such main divisions: 1. A review of the scientific and scientific-technical literature on the topic of work. 2. Description of experiments: the scheme of the plant, methods of syntheses and researches, reagents and materials. 3. Results and discussion. 4. Conclusions. 5. List of references.

1. Методичні вказівки до виконання магістерської кваліфікаційної роботи для студентів спеціальності “Хімічні технології харчових добавок та косметичних засобів”.
2. web.znu.edu.ua/lab/fordep/oformlenie/diplom_magistra.htm.

The examination commission evaluates the defense of master's qualification work on the following criteria:
- reviewer review;
- the response of the head of the work;
- the level of presentation.

To know:
- theoretical bases of the technology of production of chemicals on the work's theme;
- modern technologies of chemical production;
- design and principles of modern devices and equipment of chemical production;
- typical methods of chemical and technological calculations
To be able:
- summarize the data obtained from laboratory studies and measurements, from the point of view of their significance, and correlate them with the corresponding theory;
- to select the appropriate technological equipment and graphically depict the technological process;
- to carry out calculations of technological processes

Physics
Processes and apparatuses of the chemical production
Bases of automated design of the chemical production equipment
Mathematical modeling and optimization of objects of chemical technology
Calculation and design of apparatuses of the chemical production and enterprises of building materials
Energy technology of chemical and technological processes
Devices and equipment of the industry

1. Review of scientific and technological literature on the topic of the work. 2. Scientific and theoretical bases of the process. 3. Description of the technological scheme of the production. 4. Characteristics of working environments. 5. Material and heat calculations of the process. 6. Calculation of the main and auxiliary equipment. 7. Labor protection. 8. Technical and economic calculations. 9. Conclusions. 10. The list of literary sources.

-

Review of the work, supervisor's review, defense of diploma qualification work.

To know:
- theoretical bases of the technology of production of chemicals on the work's theme;
- modern technologies of chemical production;
- design and principles of modern devices and equipment of chemical production;
- typical methods of chemical and technological calculations
To be able:
- summarize the data obtained from laboratory studies and measurements, from the point of view of their significance, and correlate them with the corresponding theory;
- to select the appropriate technological equipment and graphically depict the technological process;
- to carry out calculations of technological processes

Physics
Processes and apparatuses of the chemical production
Bases of automated design of the chemical production equipment
Mathematical modeling and optimization of objects of chemical technology
Calculation and design of apparatuses of the chemical production and enterprises of building materials
Energy technology of chemical and technological processes
Devices and equipment of the industry

1. Review of scientific and technological literature on the topic of the work. 2. Scientific and theoretical bases of the process. 3. Description of the technological scheme of the production. 4. Characteristics of working environments. 5. Material and heat calculations of the process. 6. Calculation of the main and auxiliary equipment. 7. Labor protection. 8. Technical and economic calculations. 9. Conclusions. 10. The list of literary sources.

-

Review of the work, supervisor's review, defense of diploma qualification work.