Results of studies:
• to know the current level, trends and prospects of development of science and technology on the topic of master's thesis;
• be able to articulate the purpose of research and challenges that need to be addressed to achieve it;
• to know the source of searching information and be able to handle the literature data for setting the direction of research;
• be able to mount a pilot plant for research;
• possess methods of formulation of experimental studies;
• to know processing methods of research results;
The results obtained during the internship, become the basis for writing the Master's Work.

Necessary obligatory previous and related educational disciplines:
prerequisites:
• analytical chemistry;
• basics of the scientific research;
• disciplines of specialization.

Table of contents of the educational module: Individual work on student performance practice coincides with the theme of the master's qualification work and should provide technological solutions of a problem by experimental (sometimes theoretical) research. The practice includes the following sections: 1. Purpose of research tasks. 2. Information retrieval and processing materials for setting the direction of research. 3. Installation of pilot plants for research. 4. Experimental studies. 5. Processing of research results.

Recommended literature:
It depends on the direction of the research

Methods and evaluation criteria:
• Final control (100%, differentiated test): a report on the practice, the protection of report.

• to know the current level, trends and prospects of the development of the field of science and technology on the master's work theme;
• be able to clearly articulate the purpose and the tasks of research;
• to know sources of information search and be able to process literature data to establish a research direction;
• to possess methods of experimental research;
• to carry out an experimental studies of the chemical technology processes of organic substances;
• to carry out the mathematical processing of the results of scientific researches;
• to generalize defined results;
• to present the results of the performed research

• Scientific Research Methodology
• Technology Products of Organic Synthesis
• Study of Chemical Reactions and Processes
• Scientific Research in Chemical Technology of Organic Substances
• Catalysis in Organic Synthesis
• Research Practice
• Special Course of Scientific Research in the Field of Specialty

The individual task of the student in the practice implementing coincides with the theme of master's qualification work. He should provide for the solution of a particular technological problem by experimental or theoretical research. Practice includes: searching for information and processing data literature for the direction of research; experimental research; processing of research results; report on the study results

1. Піх З. Г. Теорія хімічних процесів органічного синтезу: Підручник. – Вид-во Нац. ун-ту "Львівська політехніка". – 2002.
2. Лебедев, Н. Н. Теория химических процессов основного органического и нефтехимического синтеза [Текст] / Н. Н. Лебедев, М. Н. Манаков, В. Ф. Швец. – М.: Химия, 1984. – 375 с.
3. Шмидт Р., Сапунов В. Н. Неформальная кинетика. Пер. с англ./Под ред. И. П. Белецкой. – М.: Мир,1985. – 264с.
4. Одабашян Г.В. Лабораторный практикум по химии и технологии основного органического и нефтехимического синтеза Учебное пособие для вузов / Под ред. Н.Н. Лебедева – М.: Химия, 1982. – 240 с.

• the individual research task (60%)
• final control: written-oral form (40%)

Results of studies:
• to know the current level, trends and prospects of development of science and technology on the topic of master's thesis;
• be able to articulate the purpose of research and challenges that need to be addressed to achieve it;
• to know the source of searching information and be able to handle the literature data for setting the direction of research;
• be able to mount a pilot plant for research;
• possess methods of formulation of experimental studies;
• to know processing methods of research results;
The results obtained during the internship, become the basis for writing the Master's Work.

Necessary obligatory previous and related educational disciplines:
prerequisites:
• analytical chemistry;
• basics of the scientific research;
• disciplines of specialization.

Table of contents of the educational module: Individual work on student performance practice coincides with the theme of the master's qualification work and should provide technological solutions of a problem by experimental (sometimes theoretical) research. The practice includes the following sections: 1. Purpose of research tasks. 2. Information retrieval and processing materials for setting the direction of research. 3. Installation of pilot plants for research. 4. Experimental studies. 5. Processing of research results.

Recommended literature:
It depends on the direction of the research

Methods and evaluation criteria:
• Final control (100%, differentiated test): a report on the practice, the protection of report.

To know the structure of the plant and enterprise management, technology and equipment; Be able to: select and substantiate the technological scheme of production and equipment taking into account the latest achievements of scientific and technological progress; have an idea: about work on a engineering position, performance of research work in production conditions, drawing up of technical documentation.

Modern technologies of refining of combustible minerals, Technology of production of oils and lubricants, Equipment and construction materials, Technology of applications, reagents and auxiliary products.

The main technical and economic indicators of the installation, the study of innovative proposals, the degree of their originality, familiarity with the economic effect of the introduction into production. Student studies the necessity and possibility of reconstructing individual units, units and installations in general in order to increase their productivity, reduce operating costs, and reduce the cost of production.

1. Топільницький П.І., Гринишин О.Б., Мачинський О.Я. Технологія первинної переробки нафти і газу – Львів: Вид-во НУ «ЛП», 2014.– 468 с. 2. Братичак М.М., Гринишин О.Б. Технологія нафти та газу. – Львів: Вид-во НУ «ЛП», 2013.– 180 с. 3. Мачинський О.Я., Топільницький П.І. Гідрокрекінг.– Львів: Вид-во НУ «ЛП», 2011.– 348 с.

final control report (100%, control measure, credit): written / oral form (100%).

• Conclusive comprehension of all the theoretical knowledge gained throughout the course of studying specific subjects, as well as acquisition of practical knowledge and skills necessary for one’s independent research/work in the future.
• Collection of materials that are required to carry out the Master’s thesis.
• Data collection, obtained throughout the research analysis performed in laboratory which is required to write the Master’s thesis.

Prerequisite courses required :
• chemistry, technology and utilization of food additives
• research methodology
• technology of food production
• chemistry and technology of cosmetic products.

Mastering of modern methods, forms of organization and tools in a future profession, their formation, based on the theoretical knowledge and practical training obtained while studying at the University, professional skills to help make independent decisions during specific work in manufacturing. Education regarding the need to continuously improve one’s knowledge and creatively apply it in practical settings.

Наскрізна програма практики для студентів спеціальності 161 „Хімічна технологія та інженерія” спеціалізаціі 8.161.08
„Хімічні технології харчових добавок та косметичних засобів”
ІУ курсу ОКП „Бакалавр” та ІІ курсу ОКП „Магістр”
/ С.А.Воронов, В.П.Васильєв, Ю.В.Панченко, Ю.Б.Стецишин, Дончак В.А. – Львів, 2018. - 22с.

Hand in printed report from practical analysis.
Final exam : oral examination (100%).

• to know the organizational structure of the enterprise (organization), the purpose and functions of the main and auxiliary units; General information about the properties of raw materials and finished products, working principle and structure of equipment, technological schemes and schemes processing of raw materials;
• be able to apply knowledge and understanding of technology for the adoption of general engineering and technical solutions; draw up a practice report.
In case of passing the practice at non-manufacturing enterprises:
• Know the existing research areas and methods for solving scientific and technological issues, modern methods of experimental studies, regulatory documentation implementing the research activities;
• be able to collect and analyze information about the test process, use a special scientific and technical literature, make a pilot study on the chosen method, summarize and organize findings, to report on practices

• general chemical technology;
• processes and apparatuses of chemical technology;
• discipline of specialization

Structure of the main and auxiliary divisions of the enterprise (organization). Types and characteristics of raw materials, auxiliary materials and products of production (directions of work). Theoretical basis of the process. Technological process of production. Structure, principle of operation, conditions and modes of operation of the main and auxiliary equipment. Control systems and product standardization.

technological regulations of the enterprise. Another reference and specialized literature depending on the topic of individual tasks in practice

final control (100%, differential grade): practice report, report protection

• to know the organizational structure of the enterprise (organization), the purpose and functions of the main and auxiliary units; General information about the properties of raw materials and finished products, working principle and structure of equipment, technological schemes and schemes processing of raw materials;
• be able to apply knowledge and understanding of technology for the adoption of general engineering and technical solutions; draw up a practice report.
In case of passing the practice at non-manufacturing enterprises:
• Know the existing research areas and methods for solving scientific and technological issues, modern methods of experimental studies, regulatory documentation implementing the research activities;
• be able to collect and analyze information about the test process, use a special scientific and technical literature, make a pilot study on the chosen method, summarize and organize findings, to report on practices

• general chemical technology;
• processes and apparatuses of chemical technology;
• discipline of specialization

Structure of the main and auxiliary divisions of the enterprise (organization). Types and characteristics of raw materials, auxiliary materials and products of production (directions of work). Theoretical basis of the process. Technological process of production. Structure, principle of operation, conditions and modes of operation of the main and auxiliary equipment. Control systems and product standardization.

technological regulations of the enterprise. Another reference and specialized literature depending on the topic of individual tasks in practice

final control (100%, differential grade): practice report, report protection